Remove the Slime in 2009 - Stone Brick Cleaning

One of the toughest jobs in pressure washing istip.
removing algae and slime from brick, as one falseFirst thing you need to do is to rinse off the brick
move with the pressure tip and you can dig aand get down past the basic crud to what you
hole and ruin the brick. It is especially difficult toreally need to be concentrating on; for this use
clean old buildings and walls, but it can be done andthe 45 degree tip and keep the nozzle a good
come out great if the right techniques are used.8-12 inches from the surface; start at the top
So, let me explain to you the methodsand work down. Now you can better see what
recommended for this.you are dealing with. So, apply some soapy
You see, for many years, I ran a company thatwater, with a little Clorox but not too much, and
franchised mobile cleaning units, and amongstapply it with a semi-hard bristle brush lightly from
other things we cleaned concrete, decks and bricktop to bottom.
work on homes. We did construction clean-up,Next, take your 25 degree tip keeping it one-foot
restoration clean-up and general pressure washingfrom the surface, starting from the bottom to
spring cleaning for our many clients in manythe top carefully moving the wand back and forth.
markets. Now then, the first thing you need to doOnce completed, see where you are at and
is get a hold of a decent pressure washer, onerepeat this process, soon the brick will be clean
which has a long wand and a 25 and 45 degreewithout digging holes or ruining it.