Parquet Floor Installation Guide

- Parquet flooring is a classics - it brings style andaccommodate a darker (walnut) strip - 1
uniquity within the room's atmosphere. It allowscm wide, which can be obtain from most
various designs of fitting and it can alsohardwood floors and add some more character
accommodate additional elements such figures,to you rooms.
borders and edging of a different type of wood.Subfloors Preparation
Having parquet floors installed however is not asThe subfloor is the most important bit of the
easy as heaving other type of woodenfloor preparation. The issues which have to be
floors installed.looked at are the level of the subfloor and the
Gettings Startedamount of moisture concentration or possibility of
The first step of planning your parquet floors willsuch appearing on later stage.
be choosing the design and respectively the sizeInstallation of parquet floors on top of wooden
of the blocks you will require. Going for a squaresubfloors is usually carried out by installation of
tiles fitting for example will require block size,additional layer of ply to level the floors. It is
which can set a square by being put together.important however, floors below to be inspected
The herringbone fitting can go with almost anyand refitted before proceeding with the ply.
fixed length parquet blocks.Sometimes works on a joist may be required.
The planning of the parquet floors will includeInstallation of parquet floors on top concrete
choosing the wood for the blocks, or we can alsofloors can be done either straight onto the
se say the number of woods, if the design wesubfloors (not reccommended) or on top of ply
are after is more sophosticated. The popularlayer again. The ply layer however, needs to
choice is oak parquet flooring.be fixed into the floors, which in case of running
If we go for a fitting without a specific design,pipe connections into the subfloors might be an
choosing herringbone for the pattern, we may notissue to bear in mind.
strictly go for bordering the floors. We can letInstallation of fixed-length parquet blocks
them go from wall to wall, which is of courseProbably the best product to use out there for
personal choice.adhesive in the installation of parquet wood floors
Some other patterns, however definately gowill be the silane based adhesive. A flexible
better with a border around, which is again choiceadhesive which have the perfect qualities and
for you to make. The border may compriseguarantees your floors will breath normaly during
of 1, 2 or 3 blocks and can include andthe seasons due to its elastcity and without
expansion gap between the border and the restloosing its strong qualities during the years will be
of the floor filled with a cork strip (moving thethe Bona R850 Flixible Adhesive. Other brands
expansion gap off the walls may be a good pointwith quality adhesives for parquet floors include
for future floor works). The border can alsoLecol and Wakol.